Home > Interior > Shifters & Components >

Shift rod bushings and hardware for VW Volkswagen
111701259A, 98-7813-B Shift rod bushing clip only 111701263, 98-7011-B Shift rod bushing hanger mount (welded in) 111701255B, 4456-B Reverse lock out plate 211711149, 98-7096-B Reverse lock out plate 211798200
 
Alternative Views:



Product Code: SHIFTRODBUSHINGS

Choose your shift rod bushing hardware

Shift rod bushing options*: 		98-7014 Shift rod bushing rebuild kit [Add $13.00]
98-2830-B Shift rod bushing only 111701259A [Add $2.00]
98-7813-B Shift rod bushing clip only 111701263 [Add $2.00]
98-7011-B Shift rod bushing hanger mount (welded in) 111701255B [Add $8.00]
4456-B Reverse lock out plate 211711149 [Add $5.00]
98-7096-B Reverse lock out plate 211798200 [Add $13.00]

Qty:  
Description
 
Original shift rod bushings are usually worn out and sloppy. If you remove the shifter and grab the shift rod, see if the rod moves up and down or side to side. That means the shift rod bushing is worn. The rod is only supposed to move forward and back. A shift rod bushing for VW Volkswagen is plastic. It is on the shift rod below the shifter. It is held in place with a c clip. Once the bushing is worn out, the hanger holding the bushing starts to wear out also. This is one of those jobs where the part is cheap but to install it takes an hour. You must remove the shift rod coupler and slide to towards the front of the car. The shift rod tappers smaller towards the coupler side. You install it on the skinny part of the rod and slide it back to the rear of the car. You can also grease the rod. It is not a fun job and helps if you have small hands. 98-7014 Shift rod bushing rebuild kit, 98-2830-B Shift rod bushing only 111701259A, 98-7813-B Shift rod bushing clip only 111701263, 98-7011-B Shift rod bushing hanger mount (welded in) 111701255B, 4456-B Reverse lock out plate 211711149, 98-7096-B Reverse lock out plate 211798200


Browse for more products in the same category as this item:

Interior > Shifters & Components
Interior
Transmission & Clutch > Transmissions
Transmission & Clutch > Transmission Mounts
Transmission & Clutch > Transmission Support Kits
Transmission & Clutch


Empi race trim performance offroad racing suspension rear bench seats with black, grey, tan vinyl w/black, grey, tan or tweed fabric for autos, trucks, boats and VW Volkswagen
Wheel adapters for VW Volkswagen to Ford, Chevy and Porsche lug bolt patterns
Standard Header Only 1600 cc Type 1 and Type 2 for VW Volkswagen $109.00
New stock style 040 dual port cylinder heads with 35.5x32 stock forged valves and 14mm 1/2" spark plug bosses for VW Volkswagen $239.00
Empi Kadron Brosol Solex carburetor replacement floats, chokes, rebuild kits, and velocity stacks for VW Volkswagen
Tools and tow bars for VW Volkswagen
Stainless Exh. Nut $0.50
Billet polished aluminum breather boxes, chrome canisters, oil breather towers, clamp or bolt on for VW Volkswagen buggy, sandrails, bajas and sand cars
Empi dual 34mm epc carburetors kits with hex cross bar linkage, chrome gauze air cleaners, single and dual port aluminum manifolds for buggy, sandrails, baja bug and VW Volkswagen Type 1, 2, 3, 4 Beetle ict