Home > Suspension Front > A-arm spindles >

5/8 " Made in USA stainless steel high misalignments
High angle misalignment stainless steel spacers are a necessary component when using heim joints and trying to achieve extreme amounts of travel. Misalignments are measured by the hole size in the heim joint or uniball, bolt size through the center of the


 
Alternative Views:





Product Code: MA5-8

Choose your 5/8 high misalignment

5/8 high misalignment options*:


Qty:  
Description
 
High angle misalignment stainless steel spacers are a necessary component when using heim joints and trying to achieve extreme amounts of travel. Misalignments are measured by the hole size in the heim joint or uniball, bolt size through the center of the misalignment and the height of the misalignment spacer. Sold each. 2 are required per heim. If you need other sizes in 3/4", 7/8", 1.0" or 1.5", Click on the size you need.
Part #
Heim joint hole
MA bolt hole
MA Height
Total width
 MA5/8X1/2X.060 5/8"1/2".060".865
 MA5/8X1/2X.093 5/8" 1/2" .093".940
 MA5/8X1/2X.250 5/8" 1/2" .250"1.245
 MA5/8X1/2X.312 5/8" 1/2" .312"1.375
 MA5/8X1/2X.375 5/8" 1/2" .375"1.500
 MA5/8X1/2X.500#5 5/8" 1/2" .500"1.750
 MA5/8X1/2X.512 5/8" 1/2" .512"1.775
 MA5/8X1/2X.525 5/8" 1/2" .525" 1.800
 MA5/8X1/2X.562 5/8" 1/2" .562" 1.870
 MA5/8X1/2X.625 5/8" 1/2" .625" 1.975
 MA5/8X1/2X.687 5/8" 1/2".687"2.125



Browse for more products in the same category as this item:

Suspension Front > A-arm spindles
Suspension Front
Suspension Front > Trailing Arms Front
Suspension Front > Spindles Combo Link
Suspension Front > Front Axle Beams Offroad
Heims, Misalignments & Bungs
New Products