|
Aluminum link pin beams, front end clamps, tabs and mounts, 90 degree chassis gussets, shock reservoir brackets, stainless steel line clamps, battery boxes for VW Volkswagen.
EMPI ALUMINUM LINK PIN AXLE BEAM
Polished Aluminum Link Pin beam is lightweight and attractive for all Sand Buggy applications. Available with or without shock towers. (Not for Sedans or Heavier Buggies). To use a stock steering damper, use EMPI's new Billet Aluminum Steering Damper Mount. For urethane bushings use P/N: 16-5143 or 16-5144 listed on page 151.
16-2045 EMPI Aluminum Link Pin Beam, w/Shock Towers
16-2046 EMPI Aluminum Link Pin Beam, w/o Shock Towers
16-2044 Aluminum Billet Steering Damper Mount
FRONT END CLAMPS
Mount a VW front beam to a tube chassis with our Front End Clamps. Made from heavy duty stamped steel. Choose chrome plated for that custom look or raw for fabrication. Also use these to mount aluminum beam and baja tube bumpers.
3162 Chrome Axle Beam Clamp Kit, 4 pcs.
3162-7 Bulk Chrome Axle Beam Clamp, Each
3161 Raw Axle Beam Clamp Kit, 8 pcs., Includes Hardware
3161-7 Bulk Raw Axle Beam Clamp, Each
TABS AND MOUNTS
For the chassis fabricator building that next project.
17-2647 Shock Mount Tab, Pair
For Multi-Shock King Pin Axle Beam
17-2651 Pedal Mount 4-Wheel Brake and Clutch Cylinder, Each
17-2650 Hydraulic Pedal Mount, Each
17-2649 Single Hydraulic Cylinder Mount, Each
17-2716 Tab, Brake Lines, Pair
90 DEGREE CHASSIS GUSSET
Add extra strength to chassis corners, uprights and roll cages.
17-2723 Gusset, 90 Degree, Set of 4
SHOCK RESERVOIR BRACKET
This weld-on bracket replaces the old urethane and hose clamp method. Sold as pairs. For 2.0" Reservoirs.
17-2719 Bracket, Shock Reservoir, Pair
STAINLESS STEEL LINE CLAMPS
These polished stainless steel clamps put the finishing touch on those clutch and brake line installations. Available for 3/16” or 1/4” line. Set of 4.
17-2717 Stainless Steel Clamp, 3/16” Line, Set of 4
17-2718 Stainless Steel Clamp, 1/4” Line, Set of 4
Battery Boxes
16-9503 Battery Box, 5 1/8" x 7 7/8", Weld onto Frame,
Fits Smaller Batteries, Complete with Hardware
16-9504 Battery Box, 9 7/8" x 7 1/4", Weld onto Frame,
Complete with Hardware. Fits Optima and Standard Batteries
|
